Alfra Rotabest Permanent Magnet Drill RB 35SP

Alfra

£890.17 
SKU: 18801

Alfra RB 35SP Rotabest Permanent Magnet - Magnetic Drill, lightweight 9.9kg with a cutting capacity of 35mm

Alfra RB 35SP Rotabest Permanent Magnet - Magnetic Drill

Description:

The RB35 SP Magnetic Based Drill is a revolution in mag drills. The incredibly powerful magnet achieves excellent adhesion, even to thin sheet steel. Because the magnetic base doesn't require an electrical supply, power cuts or damages to the supply cable during operation, still leaves the machine fixed solidly to the material being drilled - a great Health & Safety advantage. Another advantage of this machine, is that should it be left magnetised to a surface for a prolonged period, there would be no damage caused to the magnet, whereas the traditional electric version would probably overheat and burn out the magnetic coil. This unit is lightweight and very simple to use. Just position the drill in place and push down the rear lever. The permanent magnet produces a magnetic force that is higher than the one produced by the conventional and commercially available electro magnets. The machine has a built-in sensor / LED which informs the user of the adhesion strength of the magnet. The motor to base sliding plates / guides have also been addressed on this machine. These are now "self-adjusting", reducing the risk of chatter at the cutting head.  

For cutter dimensions of 12.0 to 35.0 mm and up to 50.0 mm cutting depth

Features:

  • Ergonomic handle and switch design for maximum ease of use
  • Permanent magnet with extremely strong adhesion force. Can be used on as little as 3mm thick plate
  • Magnetic pre-tension and extremely lightweight, allows easy positioning of the drill on the work surface
  • Smooth start to prolong motor and gearbox life
  • Overload protection
  • Motor emergency stop
  • Step less adjustment
  • Soft-touch grips
  • Membrane keyboard
  • Holder for Allen key
  • Cord length 5 m
  • Sensor/LED
  • Metal rings
  • Performance and weight optimisation
  • Comes with - Carrying case / Safety belt / Coolant equipment / Operating manual

Specifications:

  • Cutter Capacity: 10 - 35 mm
  • Cutting depth: 50 mm
  • Twist drill: 1 - 13 mm DIN 1897 short
  • Counter bore: 10 - 40 mm
  • Arbor: Quick-change tool-holder
  • Stroke: 105 mm
  • Height adjustment: 80 mm
  • Gearbox on-load speed: 450 rpm
  • Power consumption: 1.100 W
  • Voltage: 230 V 50-60 Hz / 110 V 50-60 Hz
  • Tool Force (10 mm S235) Drill Point Load: 3.000 N
  • Tool Force (6 mm S235) Drill Point Load: 2.500 N
  • Magnet foot: 72 x 190 mm
  • Weight: 9.9 kg

For More Magnetic Drills Click Here